Image: https://support.alphatheta.com/de/products/4416578056089?section=67RecommendedPioneer DJ
DDJ-REV1
A battle-layout controller with horizontal tempo faders — built for scratching and Serato.
Pioneer DJ is a brand of AlphaTheta Corporation — the company's name since 2020, formerly Pioneer DJ Corporation. Newer devices from the same manufacturer appear under the name AlphaTheta.
DJ controllers€200 to €350
Fits these ways
Who it is for
Anyone heading towards scratching and open format who works with Serato.
In its favour
- Battle layout like on turntables
- A real filter knob
- Serato DJ Lite included
Against it
- Unusual layout for classic mixing
- Not tied to rekordbox — if that is where you want to go, buy differently
Price range within the category
Price range checked 09/2026Manufacturer page
DJ controllers at DJLearn range from up to €100 to over €600. This product sits at €200 to €350. middle class in the category
Affiliate link: if you buy through it, we earn a commission. You pay the same price, and it changes nothing about our recommendation. How we handle this
What a Laptop only looks like with the DDJ-REV1
Price range of the setup: about €300 to €550
- This deviceDJ controllersDDJ-REV1€200 to €350
What the controls are called on this device
The learning path shows everything on the DDJ-FLX2. This table translates every control from the course to this device — with the page of the manufacturer’s manual where it appears. If a control is missing, the manual does not list it.
Terms as printed in the manual — we evaluated the German edition, so the manual’s own wording is German.
| In the course | On the device | Manual p. |
|---|---|---|
| EQ high | EQ (HI)-Regler | 15 |
| EQ mid | EQ (MID)-Regler | 15 |
| EQ low | EQ (LOW)-Regler | 15 |
| Filter / colour | FILTER-Regler The only one of the six controllers with a knob actually labelled FILTER — here the control really is called what many tutorials call it. | 15 |
| Tempo fader | Tempo-Schieberegler | 12 |
| Channel fader | Kanalfader | 17 |
| Crossfader | Crossfader | 18 |
| Master level | MASTER LEVEL-Regler | 15 |
| Performance pads | Performance Pads | 17 |
⚠️ rekordbox does not appear anywhere in the manual — the device is built for Serato. Anyone learning with it cannot follow phase 3 (rekordbox); that is finding 2.2 in docs/GERAETE_UNABHAENGIGKEIT.md and the real bottleneck.
What you still need
The device alone does not make an evening. What follows here comes from the connectors of your setup — for the devices whose manual is in our archive, with a page number.
RCA cable (2× phono)
For the buildThe master output is an RCA socket. For active speakers with RCA inputs you need an RCA-to-RCA cable; if your speakers use jack or XLR, the other end has to match.
Jack adapter 6.3 to 3.5 mm
Check firstThe headphone socket is the small 3.5 mm one. Many DJ headphones come with a 6.3 mm plug — usually an adapter is included or screwed on. Check before you want to play, not after.
Deliberately without prices: a cable price is the most short-lived figure a page can carry. This says WHAT is missing, not what it costs.
Frequently asked questions about DJ controllers
Compare directly
Devices in the same category and the same price class — the ones you actually hesitate between. Each comparison puts both side by side and crowns no winner.
